Other

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

FSA Mega Exo Small Parts.

FSA Service Parts for BB30 Frames

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

KS Dropper Post Service Parts

KS Dropper Post Service Parts

KS Dropper Post Service Parts

The Southpaw family of remote levers are designed for a secure feel without added complexity and weight, while incorporating ergonomics that compliment modern cockpits. - Ergonomically designed for 1x setups - Universal lever body - Integrated barrel adjuster - Stainless steel hardware - Understated graphics

- 2Mm powertex neoprene that prevents nicks and scratches while reducing the noise of chain slap - Tightly stitched with heavy-Duty thread to add extra strength and durability - Jumbo: Taper (95Mm to 85mm and is 254mm in length) - Standard: Taper (85Mm to 75mm and is 254mm in length) - Super jumbo: Taper (117Mm to 107mm and is 254mm in length) - Jumbo 29er: Taper (95 Mm to 85 mm and is 295 mm in length) - Swingarm: Taper (183Mm to 175mm and is 227mm in length)

- Replacement roller kits for mrp guide systems (includes bearings and hardware) - Lightweight version averages 20g less per roller (with hardware)

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Origin-8's 1-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses. You get a bag of 10 spacers.

Standard replacement star nuts for threadless steerers.

Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes

- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap

Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution. • Multi-Fit • Aluminum • 25.4mm internal diameter • 28.0mm outer diameter

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)

• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multi speed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. - Accommodates a range of chain line measurements and chainring sizes - Not designed for downhill/freeride/big hit use

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Downtube cable adjusters from Problem Solvers. - Braze-on downtube adjusters for road shifters - Contoured to fit traditional sized steel downtubes - Black Finish

The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g

Protective pad for your chainstay prevents damage and scratches. - Soft pad with Race Face logos

Made from forged and machined 6061-T6 Aluminum for high strength and light weight. - Places lever in optimal position left vacant by the lack of front shifters on 1x setups - Matchmaker 1x compatible - Lever pivots on precision bearings for smooth action and durability - 2 mounting positions for ideal placement for each user - Textured non-slip thumb pad

- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

RockShox 32mm Seal Kit